Why do my receipts print blank or garbled?
Niki POS sends each receipt to the printer as a picture, so the printer's language and font settings don't matter. Most problems come from the paper, the battery or the paper width.
The paper comes out blank or faded
- Turn the paper roll around. Thermal paper prints on one side only: scratch it with a fingernail, and the side that turns dark must face the print head.
- Use thermal paper. Ordinary paper stays blank.
- Charge the printer. A weak battery gives faint or blank prints.
The receipt is cut off, too small or full of strange marks
- The owner checks More → Receipt → Paper width: it must match the roll, 58 mm or 80 mm.
- Open More → Printer and tap Test print to check.
- Strange symbols or paper that keeps running usually mean the printer doesn't understand ESC/POS, the standard for receipt printers. Label printers and mini printers that only work with their own app can't be used.
- Printing stops halfway? Charge the printer and keep the phone close to it.
- The logo prints as a black block? Use a simpler, lighter logo, or turn off Print the store logo in More → Receipt.
The app says it couldn't print
- "No printer is set up yet": choose one in More → Printer.
- "Bluetooth is off": turn Bluetooth on, then tap Retry.
- "Printer not found": pair it again, or plug the cable back in.
- "Printer not connected": check that it's on and has paper.
- "Can't reach the network printer": put the printer and this device on the same Wi-Fi.
- Printer settings opens the printer screen. See also Connect a Bluetooth printer.